It is one of the hygienic habits of many households to wipe the hand sanitizer Foam Pump (KEXON) before washing hands. However, you may not know that the hand sanitizer foam pump that people often use does not necessarily achieve the effect of sterilization, and even damage the skin even after long-term use. Not long ago, the hand sanitizer of a well-known Japanese brand was exposed to “PH value is unqualified”. It may hurt the hand after a long time, which has caused the public to pay attention to the quality of the hand sanitizer foam pump.

Observe whether the packaging is intact, whether the writing on the packaging bottle is clear, and whether the foam pump head is strong. Generally, the hand sanitizer is discharged through the squeeze pump head. If the package quality is poor, the liquid will not be discharged or leaked during use, causing inconvenience and waste.

See if the logo is complete, if there is no factory name, factory address, etc., pay special attention to whether there is a standard number. Although there is no uniform national standard for hand sanitizer, the state does not allow non-standard production. All production enterprises must indicate the enterprise standard number on the packaging to ensure product quality.

Pay attention to the contents of the hand sanitizer itself, smell it with no smell, pungent and other odors. If it is, it may be due to the expiration date or the use of prohibited materials, it is best not to buy and use. Also observe whether there is stratification or oil-water separation. If it is, it indicates that the emulsification process is not well controlled during the production process, which will affect the washing effect.

Click Foam Pump Manufacturers to learn about more information

Cosmetic Plastic Pump (KEXON) bottle packaging has experienced various problems in the past few years. For example, the bisphenol A incident in plastic cosmetic bottles has left everyone with a lingering fear. There are also some glass cosmetic bottles and cans, such as glass slag. These all make people pay more attention to the material and quality of cosmetic bottle packaging.

However, this also gives cosmetic bottle manufacturers a chance to be self-introspective. In the past few years, on the one hand, the relevant departments have strengthened the supervision of cosmetic bottle packaging, which has made cosmetic bottles more and more strict from production to use. On the other hand, cosmetic bottle manufacturers have increased quality control from raw materials to production processes in order to survive for a long time.

In the past, the use of secondary materials and recycled materials in the production of cosmetic bottles has also improved. This is also the future of cosmetic bottle packaging.

Plastic bottles are mainly made of materials such as polyethylene or polypropylene and added with various organic solvents. Most of the beverage bottles are plastic products. The two materials, polyethylene and polypropylene, are non-toxic and tasteless. They are safe for filling humans. However, once the polyethylene is slowly dissolved by high temperature or acid corrosion, and the organic solvent is released, it will cause harm to the human body. Plastic bottles can be melted, dissolved, or reconstituted, but if transparent articles are made, particles with poor transparency and poor light transmission can be easily found.

Click Cream Jar to learn about more information

Production and ordering instructions for Plastic Pump (KEXON) packaging materials:

1. The user can customize the color of the package. It is usually made of primary color matte and magnetic white. It can also add pearl powder effect. Generally, the main body container and the cover need to be matched with the same color masterbatch, but in the production process, the container and the cover are selected. Like the material department, the appearance of the color effect will be different.

2. The surface silk screen selection materials include ordinary ink and uv ink. The uv ink has good effect, luster and three-dimensional effect. It should be confirmed by the customer before production. The silk screen effect on different material containers will be different.

3. The processing technology of bronzing, hot silver and other printing gold powder and silver powder are different in effect. The surface of the main container is hard and smooth, suitable for bronzing or hot silver. The surface is soft and the printing effect is not good and it is easy to fall off; The hot process is better than the gloss of the printing process.

4. Silk screen film first has a negative film, the graphic effect is black, the background color is transparent, the bronzing and hot silver process is positive, the graphic effect is transparent, the background color is black; the film's text and pattern ratio is too much. Small is too thin, otherwise hot stamping will not work.

5. The plastic packaging bottle is generally equipped with inner gasket, pull cap and inner plug. Very few are also equipped with a small spoon or a dropper. The main consideration is its sealing and ease of use.

Click Foam Pump Manufacturers to learn about more information

With the continuous development and advancement of society, plastic products have become a daily necessities that are closely related to us. From mechanical equipment, household appliances, small folders, Plastic Pump (KEXON) bottles, etc., we can feel the ubiquity of plastic products. It can be said that most industries in modern society are inextricably linked with the plastics industry. Cosmetic plastic bottles, as one of the largest plastic products for production and sales, have also seen a significant increase in demand with the development of society. In this regard, domestic plastic bottle molding equipment manufacturers should take the rapid growth of plastic bottles as an opportunity to find out the pulse of the development of plastic bottles, and strive to develop new, efficient and intelligent plastic bottle molding equipment, and strive to shorten the international advanced technology and equipment difference.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Foam Pump Manufacturers to learn about more information

The products produced by a Trigger Sprayer (KEXON) manufacturers are often used in our current lives. There are not many people who have raised flowers and raised grass, and watering them with watering cans is very extensive. When we use it, we will find it is more prone to aging. What is the reason?

The reason for the aging of the watering can is firstly because of its material problem, its material is mainly processed from plastic products, even if the high-quality materials are affected by ultraviolet rays during the process of use, it is aging. Moreover, there are many manufacturers who use recycled materials for engineering, which makes it easier to shorten his service life. And if we want to delay it, aging occurs, we should pay attention to reduce the direct exposure of the sun and avoid contact with corrosive substances.

In addition, we should also clean it after each use. Avoiding the long-term residual moisture in the watering can cause it to mold, which not only affects the effect of the watering can but also affects the safety of the plant.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Lotion Pump to learn about more information

In terms of design, cosmetic Cream Jar (KEXON) packaging should be based on different consumer groups, applying different groups of aesthetic concepts and psychological feelings. Ms. cosmetics bottles should reflect the warm, romantic and feminine characteristics. Men's cosmetic bottles are more masculine, personalized and easy to use. For the cosmetic bottles for the elderly, it should be reflected in the humanized design and ease of use. Children's cosmetic bottles need to reflect more cartoon elements and children's psychological needs. In addition, in terms of prominent themes, many domestic cosmetics manufacturers, such as Herborist highlights Chinese medicine, and the European poetry highlights the pearls, all of which have formed their own ideas and characteristics.

Under the circumstances that environmental protection has become the industry background, more and more enterprises have adopted low-carbon and environmentally-friendly packaging methods and packaging materials by increasing research and development technology. Well-known enterprises in the industry have slogans of packaging environmental protection, using new technologies and new materials, introducing clean production mechanisms, and reducing production mode and product structure based on green, environmentally friendly low-energy, low-pollution, low-emission (economic models), thereby reducing Carbon emissions and sustainable economic development. From the beginning of packaging design, enterprises should meet the requirements of simple, practical and green.

Click Foam Pump Manufacturers to learn about more information

The Optical Fiber Cable Distribution Box(XINGHUI) connector mainly includes three parts: a main body, a casing and a tail cap.

1. Pass the leather cable from the tail cap and use scissors to strip the outer skin of the cable to about 5-6 cm. The peeled outer skin is then cut off and the outer skin layers on both sides are kept flush. Be careful when peeling, in case of damage to the internal fiber optic cable.

2. Place the fiber optic cable in the fixture, keep the edge of the outer skin flush with the scribe line in the fixture, and then close the clamp cover. Then use the Miller clamp to close the edge of the fixture and cut off the exposed coating to expose the fiber. Then clean the exposed white fiber with alcohol.

3. Cut the fiber with a fixture. After cutting, remove the cable from the fixture and compare it with the icon on the product package. Then align the fiber with the main hole and insert it, stop when the primary reaches the bottom of the main body. At this time, you can clearly observe that the fiber is bent. Press the white crimp cap on the bottom of the main body, and then screw the cap on the bottom. On the main body, you can attach the outer casing.

NINGBO STARLITE MACHINERY TECHNOLOGY CO.,LTD. was found in 2006,located in the port city- NINGBO ZHEJIANG. We are a professional manufacturer of stamping, welding, plastic injection and SMC、BMC molding, assembling. Our products are widely used in Telecom, elevator, automobile, construction machinery, electrical appliance and other fields. We passed the ISO9001:2015 system certification. Our company covers an area of 7000 square and construction area of 6500 spuare,we have a high quality management team including 12 production management staffs, 5 technicaians and 6 QC staffs. We welcome friends for visiting and cooperation.

Click China Mechanical Parts to learn about more information

In the face of difficulties, how to break through the Plastic Pump(KEXON) bottle packaging industry, the plastic packaging industry is currently facing tremendous pressure to improve efficiency and explore new opportunities, the deterioration of the economic situation in the United States and Europe, the tightening of bank credit and the inflation of input costs are swallowing up. The profit of the packaging company. So the question now is: How fast can our industry react?

No industry can be immune to the credit crunch, but as the economic base of the major markets continues to weaken, liquidity in the credit market becomes more active. Many developed countries are now caught in an unfavorable situation of economic weakness. The Organization for Economic Co-operation and Development, whose members come from all economic powers in Europe, North America and Asia, recently announced the growth index of industrial productivity and pointed out that many of its member countries have experienced a slowdown in economic growth. Although these macroeconomic trends have had a wide-ranging impact on the social economy, its impact on the packaging sector has only just begun to emerge.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Foam Pump Manufacturers to learn about more information

Plastic Foam Pump(KEXON) bottles are defined as a plastic container that has a body bigger in diameter than the opening. While this may seem like a limiting definition, there are many different types of plastic bottles, including the following: Cylinder bottles, Foam pump bottles, Spice bottles, Honey bottles, Spray bottles, Industrial round bottles, Modern bottles with a raised edge around the base and shoulder, Boston round bottles with squeezable sides and rounded base and shoulder, Dairy round bottles, Dairy jug bottles, Diamond bottles with squeezable sides, Twin neck bottles (usually used for medical, pet, agricultural or animal products, F-style bottles (usually used for industrial or chemical uses, such as gas, anti-freeze or oil), Packer bottles (usually used for vitamins or other pharmaceutical purposes), Cosmo bottles with squeezable sides and with or without dispensing lids (usually used for cosmetics), Custom bottle packaging.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Trigger Sprayer to learn about more information

PETG Plastic Pump(KEXON) bottles have high transparency, PETG is a transparent, amorphous copolyester. The common comonomer for PETG is 1,4-cyclohexanedimethanol, which is called polyethylene terephthalate-1,4-cyclohexane. Dimethanol ester. It is a product of polycondensation of terephthalic acid (PTA), ethylene glycol (EG) and 1,4-cyclohexanedimethanol (CHDM) by transesterification. Compared with PET, 1,4 - Cyclohexane dimethanol comonomer, which has more ethylene glycol comonomer than PCT. Therefore, the performance of PETG is quite different from that of PET and PCT. PETG sheet has outstanding toughness and high impact strength, its impact strength is 3~10 times that of modified polyacrylate, and it has a wide processing range, high mechanical strength and excellent flexibility, compared with PVC transparency. High, good gloss, easy to print and environmentally friendly.

The advantages of PETC:

1. PETG Plastic Pump bottles have high transparency, high impact resistance and high chemical resistance, and are widely used in the packaging of high-grade cosmetics. At present, PETG squeezes out large-capacity plastic bottles.

2, PETG plastic bottles have FDA certification, can be safely used for food packaging

3. For the manufacturers of plastic bottles, most of the current plastic bottles use the injection-blowing process. The injection-blowing process is to first make the preforms and then blow out the bottles. It must open two sets of molds, the development cost is relatively high, and the process is complicated. The extrusion blowing process has lower development costs, simple process and short molding cycle.

Click Trigger Sprayer to learn about more information